Waterways SA1 Mixed Bed Filter

Mixed bed filters are used for sediment removal over a wide range of flow rates. Due to a much larger surface area and the ability to be backwashed the dirt holding/handling capability of a mixed bed filter is far superior to cartridges. The beds can be made up of different filtering sands and filtration media.


Type Automatic Mixed Bed Filter
Description Self standing pressure vessel (blue) with top mounted valve
Media Tank 9” (23cm) x 48” (102cm)
wound fibreglass pressure vessel
Media 30kg of mixed media. Sand, anthracite and gravels
Control Valve Fleck 5000 electronic valve, fast and rapid rinse, full adjustable function,
1-99 day backwash
Flow Rate - Continuous 25 litres per minute
Flow Rate - Peak 30 litres per minute
Maximum Pressure 600 kpa (85psi)
Minimum Pressure 175 kpa (25psi)
Inlet / Outlet Pipe 3/4” (20mm)
Drain Pipe 1/2” (12mm)
Voltage 240 volts with 24 volts step down transformer
Note: Product specifications are a guide only and can change without notice.

Specification Sheet

Waterways Mixed Bed Filter – SA1

Full Desktop Site